Repurpose What You Have
Turn an underused tennis surface into regulation pickleball play without pouring a new slab.
What Goes Wrong
Skipping surface prep or layout planning creates problems that cost more to fix than the original conversion.
Striping over an active crack reproduces the failure within months as South Texas heat expands the base layer.
The builder patches structural cracks with patching compound and allows a full cure interval before any acrylic is applied.
A conversion kit handles line layout but cannot fix drainage problems, worn coating, or a surface that will not hold paint.
A drainage inspection and coating condition review happen before layout planning, so the finished surface plays correctly from day one.
Placing pickleball lines without measuring the full footprint leaves courts that feel tight and confuse players mid-game.
The builder confirms how many 20-by-44-foot areas fit, marks shared sidelines, and verifies net post placement before striping begins.
A tennis net left at its standard height makes pickleball play uneven and does not meet regulation requirements for the sport.
Net height is set to 36 inches at the sidelines and 34 inches at the center, with post replacement where existing hardware cannot adapt.
Scope of Work
Each stage of the work is scoped and priced separately so you know exactly what is included before anything starts.
The builder inspects existing concrete or asphalt for cracks, drainage slope, and coating wear before any layout work begins.
Structural cracks are patched with compound, allowed to cure, and sealed so the finished surface holds paint through seasonal heat cycles.
The builder measures the full footprint, plans how many 20-by-44-foot areas fit, and marks shared sidelines before striping.
Acrylic-based sport surface paint is applied at the regulation 2-inch line width in a color that reads clearly against the base.
Net height is set to 36 inches at the sidelines and 34 inches at the center, with post replacement where existing hardware cannot adapt.
For HOA facilities and parks, the builder plans shared sidelines and safe buffer zones across multiple playing areas in one session.
UV-resistant acrylic coat over the full surface area.
Slope check to confirm water clears the playing area.
New posts set in concrete at regulation pickleball spacing.
Builder accounts for community approval requirements upfront.
Why Choose Us
Accountability at every stage, from the first site visit to the final walkthrough, keeps the project on track and on scope.
An itemised estimate covers surface repair, striping, and net work as separate line items, no surprises mid-project.
Every enquiry begins with a no-commitment site visit to assess the surface and confirm what the conversion actually needs.
Partners serving San Antonio understand how heat cycles and UV exposure affect acrylic coatings and crack behavior.
The builder walks the finished surface with you and confirms line width, net height, and drainage before closing the job.
Partners handle design review requirements and multi-court layouts for HOA communities, parks, and commercial facilities.
The Process
01
Submit your site details and a local builder schedules a free on-site visit to assess the surface and drainage condition.
02
You receive an itemised estimate covering crack repair, layout measurement, line striping, and any net hardware changes needed.
03
The builder walks the finished surface with you, confirming regulation line width, net height, and drainage before sign-off.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Line striping conversion | $1,000-$3,000 |
| Conversion with net and minor hardware | $3,000-$8,000 |
| Conversion with resurfacing and upgrades | $5,000-$15,000 |
Tell us the site and the sport, and we’ll arrange an on-site evaluation and itemised written estimate before anything is booked.